Introduction to the BMENOR2200 Remote I/O Head Module
Industrial control systems face constant pressure to do more with less wiring, less downtime, and faster commissioning. The Schneider Electric BMENOR2200 answers that pressure as a Remote I/O (RIO) head module within the Modicon M580 series. It acts as the scanner that manages remote I/O drops and handles RIO drop configuration, so your control architecture stays distributed instead of tethered to a central cabinet.
This module belongs to the current flagship ePAC platform, introduced in 2014 to replace Quantum and Premium systems. That lineage matters for buyers planning an upgrade. Instead of ripping out existing field wiring, you can modernize the controller layer while keeping remote I/O where it already sits.
Technical Specifications That Shape Your Architecture
Dual Ethernet Ports and Open Protocols
The BMENOR2200 provides built-in Ethernet (RJ45) ports and supports both Modbus TCP and EtherNet/IP. In practice, that dual-protocol support means you can integrate the module into mixed environments without adding gateway hardware. One network can serve your Modbus TCP devices while EtherNet/IP handles another segment.
Backplane Power and Current Draw
Supply voltage runs at 3.3 V DC / 24 V DC via the backplane, with a bus current of 600 mA at 5 V DC. These figures matter when you calculate power budget across the rack. A single-slot occupation keeps the load predictable and leaves room for other modules on the Ethernet backplane (BMEXBP).
Environmental and Physical Profile
Operating temperature spans 0°C to +60°C, and storage temperature ranges from -25°C to +70°C. Relative humidity tolerance sits at 5% to 95% non-condensing. The IP20 protection rating suits cabinet-mounted installations. At 100 × 28 × 93 mm and 0.2 kg, the module fits standard rack layouts without special mounting hardware.
Where the BMENOR2200 Fits in Real Plants
Water and Wastewater Treatment
Treatment plants spread pumps, valves, and sensors across large sites. The BMENOR2200 manages remote I/O drops over Ethernet, so you can place I/O near the process and run fewer home-run cables. Modbus TCP support connects legacy instrumentation without a full fieldbus overhaul.
Manufacturing Line Retrofits
When a plant replaces an aging Quantum or Premium controller, the Modicon M580 platform offers a migration path. This RIO head module lets you keep existing remote racks and update the control layer. The result is shorter shutdown windows and lower rewiring costs.
Packaging and Material Handling
High-speed lines need deterministic communication. EtherNet/IP support aligns with common drive and motion devices, while the module’s 600 mA backplane draw keeps power planning simple across the rack.
Installation and Setup Guidance
Mount the module in a single slot on the Ethernet backplane (BMEXBP). Confirm the backplane supplies the required 3.3 V DC / 24 V DC and that total bus current stays within your power budget. Connect Ethernet (RJ45) cabling to the built-in ports, then configure RIO drops through your M580 engineering environment.
Keep the cabinet within the 0°C to +60°C operating range. Maintain 5% to 95% non-condensing humidity and avoid conductive dust, since the IP20 rating does not protect against ingress. Follow the manufacturer’s safety manual for all wiring and configuration steps.
Maintenance and Reliability
Inspect periodically for loose Ethernet connections and dust accumulation on the module face. Because the unit has no moving parts, wear points are minimal. Thermal stress is the main long-term risk, so verify cabinet cooling keeps temperatures inside the rated window. Log RIO drop status regularly to catch communication faults early.
Compatibility and Integration
The BMENOR2200 integrates with the Modicon M580 ePAC platform and the Ethernet backplane (BMEXBP). It communicates over Modbus TCP and EtherNet/IP, which allows connection to a broad range of controllers, drives, and I/O devices. Verify firmware and engineering software compatibility before commissioning.
Selection Guide: What to Confirm Before Buying
Check that your backplane provides the required supply voltage and current capacity. Confirm your network uses Modbus TCP or EtherNet/IP. Verify the single-slot footprint fits your rack plan. The lifecycle status is Active, so long-term support is available. SpareTechPLC supplies this module and can confirm current availability.
Frequently Asked Questions
What protocols does the BMENOR2200 support?
It supports Modbus TCP and EtherNet/IP through its built-in Ethernet (RJ45) ports.
How much backplane current does it draw?
The module draws 600 mA at 5 V DC from the backplane.
What is the operating temperature range?
It operates from 0°C to +60°C and stores from -25°C to +70°C.
Is this module part of an active platform?
Yes. It belongs to the Modicon M580 ePAC platform, which remains active and replaced Quantum and Premium systems.
What backplane does it require?
It uses the Ethernet backplane (BMEXBP) and occupies one slot.
