Consulting Overview: Why the 170ANE03000 Still Matters
Engineers maintaining Modicon Momentum systems often face a difficult choice: rip out a working architecture or find the exact communication module that keeps it running. The 170ANE03000 from Schneider Electric solves that problem. It is an Ethernet communication adapter built specifically for the Modicon Momentum series, giving your existing I/O bases a direct path to Modbus TCP networks. If your plant runs Momentum hardware and you need reliable Ethernet connectivity without a full platform migration, this adapter is the practical answer.
Technical Capabilities That Drive Real Decisions
The 170ANE03000 delivers exactly what a controls engineer needs for network integration, nothing more and nothing less. Here is what the data tells us:
- Modbus TCP over Ethernet — a widely supported industrial protocol that integrates with most SCADA, HMI, and DCS environments without custom drivers.
- 1× Ethernet 10/100 Mbps (RJ45) port — standard copper connectivity for plant-floor networks, supporting both legacy 10 Mbps segments and modern 100 Mbps switches.
- 24V DC supply voltage — matches the typical control cabinet power architecture found in Momentum installations.
- 2.5 W power consumption — low thermal load inside enclosures, which helps extend the life of nearby components.
- IP20 protection rating — designed for clean, controlled cabinet environments, not washdown or outdoor areas.
- Compact footprint: 125 × 141.5 × 47.5 mm, 0.2 kg — easy to fit into existing Momentum racks without re-engineering panel space.
Each of these specifications points to one conclusion: this adapter is a drop-in communication upgrade for Momentum I/O bases, not a complex engineering project.
Where the 170ANE03000 Proves Its Value
Legacy Line Connectivity
Many production lines still rely on Momentum I/O for discrete and analog signals. When the control layer moves to Ethernet-based supervision, the 170ANE03000 bridges that gap. It lets existing I/O bases report over Modbus TCP to a modern SCADA system, avoiding a costly rip-and-replace of perfectly functional I/O hardware.
Spare Parts Strategy for Discontinued Systems
Because the 170ANE03000 is discontinued, forward-thinking maintenance teams treat it as a critical spare. One adapter on the shelf can prevent hours of unplanned downtime when a network module fails. The low weight and compact size make it easy to store in a standard spares cabinet.
Panel Space Optimization
With a 47.5 mm depth and 0.2 kg weight, this adapter adds Ethernet capability without demanding significant panel real estate. That matters in crowded control cabinets where every millimeter counts.
Installation and Integration Guidance
Mount the 170ANE03000 directly onto a compatible Momentum I/O base. Connect the RJ45 port to your Ethernet switch or directly to a programming terminal. Apply 24V DC power according to the Momentum system wiring conventions. Once powered, configure the Modbus TCP parameters through your existing engineering software. Because the adapter draws only 2.5 W, no additional thermal management is required in most cabinets.
Always follow Schneider Electric’s original installation documentation for the Momentum series. Do not substitute power supplies or cabling outside the specified ratings.
Maintenance and Lifecycle Reality
The 170ANE03000 carries an IP20 rating, so keep it in a clean, dry cabinet free from conductive dust and moisture. Periodically inspect the RJ45 connector for wear and verify that the adapter remains firmly seated on the I/O base. There are no user-serviceable parts inside, so avoid disassembly.
This product is discontinued. Last verified: 2026-09. That means availability depends on remaining stock in the secondary market. Please verify current lifecycle status and availability with SpareTechPLC before ordering. For teams running Momentum systems, securing a spare now is a cost-effective alternative to an emergency redesign later.
Compatibility Checklist Before You Buy
Confirm that your existing hardware includes Modicon Momentum I/O bases. Verify that your network uses Modbus TCP over Ethernet and that your power supply provides 24V DC. Check that your cabinet environment meets the IP20 rating conditions. If you are unsure about compatibility, the team at SpareTechPLC can help you cross-reference your current setup.
Frequently Asked Questions
Is the 170ANE03000 still in production?
No. Schneider Electric has discontinued this model. Availability depends on remaining stock. Contact SpareTechPLC to check current inventory.
What protocol does this adapter support?
It supports Modbus TCP over Ethernet through a single 10/100 Mbps RJ45 port.
Can I use this adapter with any PLC brand?
It is designed specifically for Modicon Momentum I/O bases. Compatibility with other systems is not specified.
What is the power requirement?
The adapter operates on 24V DC and consumes 2.5 W.
Does it come with a warranty?
Warranty terms are not included in the product data. Please ask SpareTechPLC for current warranty and return policies.
