Why the iC60N 2P C16 Belongs in Your Panel
When a 16A final circuit needs dependable overcurrent protection, the iC60N 2P C16 from Schneider Electric is a proven choice. As part of the Acti9 iC60 series, this two-pole miniature circuit breaker combines thermal-magnetic protection with a C-curve trip response. It suits resistive and inductive loads where moderate inrush currents occur. The device mounts on standard 35 mm DIN rail and measures just 85 × 36 × 78.5 mm, so it fits tight enclosures without wasting space.
Key Specifications That Matter
Breaking Capacity and Voltage Ratings
The iC60N 2P C16 offers a 6 kA breaking capacity at 230/400V under IEC 60898-1. That rating tells you the breaker can safely interrupt fault currents up to 6,000 amperes. For commercial and light industrial distribution boards, this provides a solid layer of protection. The rated voltage reaches 400V AC and 125V DC, giving you flexibility across common supply types.
Trip Curve C and 16A Rating
The C-curve trips magnetically at 8×In ±20%, meaning it tolerates short surges from small motors or transformers. At the same time, the 16A rated current matches typical lighting, socket, and control circuits. This balance reduces nuisance tripping while still clearing genuine faults quickly.
Operating Temperature and Service Life
With an operating range of -35 to 70 °C, the breaker performs in cold storage rooms or hot plant rooms alike. Mechanical life reaches 20,000 cycles, and electrical life reaches 10,000 cycles. Those figures support long service intervals and lower replacement costs over the panel’s lifetime.
Where This Breaker Fits Best
Commercial Distribution Boards
Panel builders often specify the iC60N 2P C16 for sub-distribution circuits feeding office lighting or mixed loads. The 2-pole configuration protects both live and neutral, which suits TN-S and TN-C-S systems. Its compact width helps maximize the number of outgoing ways per board.
Light Industrial Control Panels
Machine builders use this breaker to protect control transformers and small drives. The C-curve handles the inrush from these devices without tripping. Because the breaker carries EN/IEC 60898-1 and EN/IEC 60947-2 approvals, it meets both household and industrial standards.
Replacement and Upgrade Projects
If you are replacing an older Acti9 device, the iC60N 2P C16 drops into the same 35 mm DIN rail footprint. The 85 × 36 × 78.5 mm dimensions and 0.25 kg weight keep handling simple. This makes it a practical spare for maintenance teams standardizing on the Acti9 range.
Installation Notes for Engineers
Mount the breaker on a 35 mm DIN rail and confirm the supply voltage matches the 400V AC or 125V DC rating. Tighten terminals to the torque stated in Schneider Electric’s documentation. Verify the C-curve suits your load’s inrush profile before commissioning. Always follow local wiring regulations and the manufacturer’s instructions.
Maintenance and Long-Term Reliability
The iC60N 2P C16 needs little routine attention. Inspect periodically for signs of overheating, discoloration, or loose connections. In dusty or humid environments, check the enclosure’s IP rating and keep the breaker clean. With 20,000 mechanical and 10,000 electrical cycles, it supports years of dependable service when operated within its ratings.
Compatibility and Integration
The Acti9 iC60 series shares a common DIN rail system with other Acti9 components. You can combine it with compatible auxiliaries and busbars from the same range. The 2-pole design works with standard distribution boards and enclosures. Confirm panel space and busbar compatibility before ordering.
What to Verify Before You Buy
Check that your system voltage does not exceed 400V AC or 125V DC. Confirm the 16A rating and C-curve match your load characteristics. Ensure your panel accepts 35 mm DIN rail and that the 36 mm width fits your available ways. For current lifecycle status and availability, contact SpareTechPLC before ordering.
Frequently Asked Questions
What does the C-curve on this breaker mean?
The C-curve trips magnetically at 8×In ±20%, so it tolerates moderate inrush currents from small motors and transformers without nuisance tripping.
Can I use this breaker on a DC system?
Yes, the rated voltage includes 125V DC, making it suitable for certain DC applications within that limit.
What is the breaking capacity of the iC60N 2P C16?
It provides 6 kA at 230/400V under IEC 60898-1, enough for many commercial and light industrial installations.
How many poles does this device have?
It is a 2-pole breaker, so it can protect both live and neutral conductors in suitable systems.
Is this product still in production?
Yes, the Acti9 iC60 range is active. The lifecycle was last verified in 2026-09. Contact SpareTechPLC to confirm current stock.
