When Downtime Strikes: The VersaMax Power Solution
A production line halts when a VersaMax PLC loses backplane power. The GE IC200PWR102 expanded power supply solves this exact problem. It delivers stable 5 VDC and 3.3 VDC outputs from a 120/240 VAC source. This module powers CPUs, I/O modules, and network interface units. It keeps your automated processes running without interruption.
What Is the IC200PWR102?
The IC200PWR102 is a power supply module from the GE Fanuc VersaMax family. Emerson Automation currently manufactures it, formerly GE Intelligent Platforms. This expanded power supply converts AC input into the DC voltages your PLC backplane requires. It handles 85-132 VAC or 176-264 VAC input ranges. The module provides 5 VDC and 3.3 VDC outputs with a total maximum current of 1.5 A. Built-in short circuit and overload protection safeguard your equipment.
Key Technical Specifications
| Specification | Value |
|---|---|
| Input Voltage Range | 85-132 VAC; 176-264 VAC |
| Input Voltage Nominal | 120 VAC; 240 VAC |
| Input Frequency | 47-63 Hz |
| Output Voltage | 5 VDC; 3.3 VDC |
| Total Output Current | 1.5 A maximum |
| Output Current at 5 VDC | 1.5 A maximum |
| Output Current at 3.3 VDC | 1.0 A maximum |
| Input Power | 27 VA |
| Holdup Time | 20 ms |
| Protection | Short circuit; overload |
| Dimensions | 49 mm x 133.4 mm x 39 mm |
Decoding the Power Specs
The 1.5 A total output current limits how many modules you can power. The 5 VDC and 3.3 VDC outputs serve different backplane needs. The 20 ms holdup time keeps your PLC alive during brief power dips. The jumper-based voltage selection simplifies installation for 120 VAC or 240 VAC systems.
Why the IC200PWR102 Matters for Your Operations
This module prevents costly downtime by delivering consistent power. Its expanded power feature supports larger VersaMax configurations. The built-in protection reduces repair costs from electrical faults. For facilities running 24/7 operations, this reliability directly impacts your bottom line.
Installation and Setup
Mount the IC200PWR102 on a VersaMax backplane or power supply booster carrier. Set the input voltage jumper correctly: install it for 120 VAC, remove it for 240 VAC. Never use the jumper with 240 VAC input—it can damage the module and pose a safety hazard. Connect input power according to local electrical codes. Verify all connections before applying power.
Maintenance and Reliability
Inspect the module periodically for signs of overheating or damage. Ensure adequate ventilation around the installation. Check terminal connections for tightness during routine maintenance. The short circuit and overload protection require no user maintenance. Follow the manufacturer’s safety manual for all service procedures.
Compatibility and Integration
The IC200PWR102 works with VersaMax CPUs, NIUs, and I/O modules. It can serve as a primary or supplemental power supply. Use it with a power supply booster carrier to expand capacity. This module integrates seamlessly into existing VersaMax systems.
Selection Guide
Before purchasing, verify your backplane power requirements. Confirm your input voltage matches the jumper configuration. Check that the 1.5 A total output meets your module count needs. SpareTechPLC offers this module and can help you select the right power supply for your application.
Frequently Asked Questions
What is the difference between the IC200PWR102 and other VersaMax power supplies?
The IC200PWR102 is an expanded AC power supply. It accepts 120/240 VAC input and provides 5 VDC and 3.3 VDC outputs. Other VersaMax supplies may use DC input or offer different output ratings.
Can I use the IC200PWR102 as a standalone power source?
No, it must connect to a VersaMax backplane or booster carrier. It powers modules installed on that backplane.
How do I set the input voltage for 240 VAC?
Remove the jumper from the two terminals on the right side of the ground terminal. This configures the module for 176-264 VAC input.
What happens if I leave the jumper installed for 240 VAC?
This can damage the module and may be fatal to users. Always remove the jumper for 240 VAC operation.
Does the IC200PWR102 include short circuit protection?
Yes, it has built-in short circuit and overload protection.
